News Date:2015-09-14 15:42:33
Fly ash is the main material of the lime ball mill. Hydrate lime is one of the important materials for aerated concrete producing. After mixing with cement, the primary function is to offer the workable CaO, which can take effect with the SiO2 and Al2O3 under the hydrothermal heat circumstance.
No matter it is fly as or the hydrate lime, they all need to be fine ground. Ball mill is the best fine grinding machinery, which has been widely used in the cement making, silicate product, new building material, refractory material, chemical fertilizer, black non-ferrous metals mineral separation and the glass ceramic, etc. It is available for the ball mill to operate in dry or wet grinding type. Our best technical team can design the structure according to your need on the base of the original.
Working principle
The hydrate ball mill is a type of horizontal cylinder rotary equipment, gear drive out edge mill, two bins mill and grate ball mill. The material is feed into the first bin equably by the hollow shaft in a screw way. The first bin is equipped with ladder lining plate and different kinds of steel balls. When the cylinder is rotating, the centrifugal force brings the steel balls at a certain height and then hit on the materials badly. The material then will be ground again by the steel balls load at the second bin, which is lined with plane liner. The finished products are discharged out of the mill via the discharge grate.
Structure Features
The hydrate lime mill is consist of the feeding device, discharge device, rotary part, transmission part (gear box, small transmission gear, motor, electronic control). The hollow shaft is made by steel casting. The liner is disconnetctable. The big rotating gear is also made by steel casting and machining. The cylinder is set with the wear-resisting lining plate.
Technical Parameter
